Shenzhen SMTfly Electronic Equipment Manufactory Ltd
Shenzhen SMTfly Electronic Equipment Manufactory Ltd
Add to Cart
FPC Printing Machine-Circuit Board Printer Machine,SMTfly-A9Specificaiton:
| Model | A9 | |
| Item | ||
| Screen Frames | Min Size | 470X370mm |
| Max Size | 737X737mm | |
| Thickness | 25~40mm | |
| PCB Min Size | 50X50mm | |
| PCB Max Size | 510X340mm(530X340mm) | |
| PCB Thickness | 0.4~6mm | |
| PCB Warpage | ＜1% | |
| Transport Height | 900±40mm | |
| Transport Direction | Left-Right; Right-Left; Left-Left; Right-Right | |
| Transport Speed | Max 1500mm/S Programmable | |
| Board Location PCB |
Support System | Magnetic Pin/Up-down table adjusted/support block by hand Magnetic thimble/adjustable jacking platform/ contour block |
| Clamping System | side clamping, vacuum nozzle, | |
| Print head | Two independent motorised print heads | |
| Squeegee Speed | 6~200mm/sec | |
| Squeegee Pressure | 0~15Kg | |
| Squeegee Angle | 60°/55°/45° | |
| Squeegee Type | Stainless steel(Standard), plastic | |
| Stencil Separation Speed | 0.1~20mm/sec Programmable | |
| Cleaning System | Dry,Wet,Vacuum (Programmable) | |
| Table Adjustment ranges | X:±10mm;Y:±10mm;θ:±2° | |
| Machine | ||
| Repeat Position Accuracy | ±0.008mm | |
| Printing Accuracy | ±0.02mm | |
| Cycle Time | <7s (Exclude Printing & Cleaning) | |
| Product Changeover | <5Min | |
| Air Required | 4.5~6Kg/cm2 | |
| Power Input | AC:220±10%,50/60HZ 1Φ 3KW | |
| Control Method | PC Control | |
| Machine Dimensions | 1220(L)X1530(W)X1500(H)mm | |
| Machine Weight | Approx:1000Kg | |
Parts of the PCB Solder Paste Printer Machine Description:
1. Scraper system
* the arch bridge is suspended straight and straight
* programmable suspension self-adjusting stepping motor drives the printing head
* four-wheel positioning sliding rail structure of bilateral double-slide block ensures the accuracy and smoothness of operation before and after scraping
* for before and after the squeegee pressure difference required and the stability of the lifting design, to prevent leakage of solder paste and blade clamping design has certain elasticity, squeegee pressure, lifting speed, the printing speed, print scope software is adjustable, and provides customers with a variety of tin under the demoulding ways to adapt to different requirements of PCB, for the customer provides a good platform for the control of printing;
* slide rail scraper system to improve operation stability and prolong service life;
Full closed-loop scraper pressure feedback device, always monitor the pressure of scraper pressure, make the lower tin more full.
2. Steel mesh positioning system
The size of steel mesh has good and wide applicability
The imported SMC cylinder is used as the cylinder.
Embedded scale, never fall off
Segmented fixed steel frame.
3. Image and optical path system
X, the Y-axis USES the Japanese black field high ground wire rod, the two ends Japan matsushita motor drive
Internal increase polaroid, automatic accurate grasping different type of the MARK point
Upper, lower and coaxial 3 uniform light source
Japan's Toshiba industrial camera.
4. PCB transportation and positioning system
The inlet direction arbitrary selection, free combination
Special process of inner tooth transport belt, prevent card board
Programmable transport speed control can make the suspension more accurate
Use the sexual side clamp and vacuum suction chamber, effectively clamping the PCB to ensure the complete smooth contact between PCB and steel mesh.
5. Cleaning system
Spray type cleaning
Dry, wet, vacuum-free combination
Separate cleaning structures
Circular cleaning rubber strip
Cleaning fluid, and steel net cleaning paper amount controlled.
6. Platform calibration system
UVW platform structure, high precision, large rigidity and compact structure
Triaxial linkage, small volume, high precision
FPC Printing Machine-Circuit Board Printer Machine Application:
