	A A:≥ 0.25mm B :1.2mm(Max) Standard cutter : C1:≥0.5mm C2:≥2.0mm D :≥8mm(could be custom made) H :≤14mm Θ°:≥20°
Panel Width mm	≤250
PCB Width mm	8～210
PCB Length mm	200mm(Min)
PCB Thckness mm	0.8～3.5
Depaneling Speed mm/min	60～7500
Power Source VAC	110/220
Power	450
Weight Kg	260

Automatic PCB Separator / PCB Depaneling / LED PCB Cutter Machine Maintenance:

Make sure machine is clean before running;
Add lubricating oil to sliding parts regularly;
Check the tightness of fixed screws periodically;
Please clean the machine and filter box dust after operation per day;
It is necessary to add rust preventing oil to blades and shaft and cover with cloth, in case of stopping using the machine.

Automatic PCB Separator / PCB Depaneling / LED PCB Cutter Machine Feature:

Suitable for V-scored panels;
Available for different width panel, no limit on PCB length;
Use PLC, easy to operate;
English software;
There is total capacity and daily capacity record;
Has a counter function, stop working when it reach the setting capacity;
Has auto-alarm device;
Use 2 rows of blade sets for depaneling to realize multipieces singulation to improve capacity;
Safty device. Machine will alarm and stop working if safty cover is open during depaneling. But it works under testing mode;
2 rows of blades could be adjusted 0-4mm in horizontal direction, 0-7.5mm in vertical direction;
Has conveyor for landing to send the boards to next process to avoid manual damage from picking;
Tail of conveyor height is adjustable for next processing;
Conveyor landing speed and blade speed is adjustable;
Circular blades could be re-sharpened.

Automatic PCB Separator / PCB Depaneling / LED PCB Cutter Machine Common Failture and Solution:

Faults	Reason	Solution
1.No response when press power switch	a.No power	Connect power source
1.No response when press power switch	b.Blown fuse	Check and replace fuse
2.Partial cutting	a.Guide bars go wrong position	Adjust guide bars
2.Partial cutting	b.Alignment is not the best	Adjust blade tips to match score lines
3.Not cut off	Blade clearance is too much	Adjust blade clearance
4.Rough edge	Blade damaged	Re-sharpen or replace blades

Automatic LED PCB V Cut Machine , SMTfly-5 PCB Depaneling Equipment Separator

Laser PCB Depaneling Machine